Epsilon EClipse™ Electrochemical Analyzer
QVEF1031
Epsilon EClipse™ Electrochemical Analyzer
The Epsilon EClipse™ is the latest electrochemical analyzer manufactured by BASi. It is a potentiostat/galvanostat with a second working electrode for bipotentiostat measurements. It comes with software that enables the most popular electrochemical techniques such as cyclic voltammetry, chronoamperometry, and chronopotentiometry.
Features:
Epsilon EClipse™ Electrochemical Analyzer
| Product number | QVEF1031 |
| OEM reference | EF-1031 |
The Epsilon EClipse™ is the latest electrochemical analyzer manufactured by BASi. It is a potentiostat/galvanostat with a second working electrode for bipotentiostat measurements. It comes with software that enables the most popular electrochemical techniques such as cyclic voltammetry, chronoamperometry, and chronopotentiometry.
Features:
- Potentiostat/Galvanostat
- Bipotentiostat
- Control BASi cell stands
- Easy access front connector location for all electrochemical cell and cell stands
- Positive feedback iR compensation
- Internal dummy cells for hardware test
- Analog filtering and digital smoothing
Accessories:
- Compatible Cell stands:
QVEF1085 - C-3 Cell Stand Package
QVEF1100 - RDE-2 Rotating Disk Electrode
QVEF1400 - Controlled Growth Mercury Electrode Cell Stand - Additional software
QVEF1646 - Basic plus software
QVEF1663 - DigiSim - Simulation Software for ElectroChemistry - Replacement cables:
QVER9860 - Epsilon EClipse™ Bi-Potentiostat cable
QVER9861 - Epsilon EClipse™ Cell Lead Cable
QVER9862 - Epsilon EClipse™ Cell Stand Cable
QVER9863 - Epsilon Eclipse™ Cell Lead Cable for Screen Printed Electrodes
Potentiostat:
- Channel 1 applied potential: Dynamic DAC: 16 bit, ±3.275 V @ 0.1 mV resolution or ±10 V @ 0.33 mV resolution
- Offset DAC: 8 bit, ±2.55 V @ 10 mV resolution
- Channel 2 applied potential: Dynamic DAC: 8 bit, ±2.55 V @ 10 mV resolution
- Compliance voltage: ±12 V
- Maximum current: 100 mA
- Bandwidth: > 100 kHz
- Bias current: < 1pA
- Electrometer input impedance: > 1012W
- (values for parameters other than applied potential are for both channels)
- Full scale sensitivity: 1 nA*, 10 nA*, 100 nA, 1 µA, 10 µA, 100 µA, 1 mA, 10 mA,100 mA, (*secondary gain used)
- Secondary gain: x1, x10, and x100
- ADC resolution: 16 bit
- Sampling rate: 50 kHz (20 µs/conversion)
- Data length: up to 64k points - fast
- Applied current: 50 pA - 50 mA
- Range: ±10 V, ± 1 V
- Measured potential resolution: 0.02 mV
- Max leakage current: 30 pA
- Eout (applied potential)
- Iout (current to voltage output)
- Ein (input connection for external applied wave form)
- Cell Stand port (control of C-3 Cell Stand and CGME)
- Ordering Port (control of RDE-2)
- PC (USB) port
- Trigger out (TTL)
- Win 7 or higher
- Pentium III
- 512 MB RAM
- 50 MB hard drive space available
- USB port
- 120 or 240 VAC, 50/60 Hz, 60 VA
- 15.75" (40 cm) x 5.25" (13 cm) x 12.75" (32.5 cm)
- 17.5 lb (7.4 kg) (1 channel)
